Mustang V6-4.0L (2008)
3. Clean the drain plug. Apply thread sealant and reinstall.
^
Tighten to 18 Nm (13 lb-ft).
4. NOTE: Prior to removal, clean the area around the filler plug.
Remove the filler plug.
5. NOTE: Do not overfill the transmission. This will cause transmission fluid to be forced out of the case.
Using a suitable oil suction gun, fill the transmission with the recommended fluid.
^
Transmission capacity is 2.61L (2.8 qt).
6. Clean the filler plug. Apply thread sealant and reinstall.
^
Tighten to 18 Nm (13 lb-ft).