ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2464 > < Initial Inspection and Diagnostic Overview|Page 2462
Page 21
background image

H7-H10

Test I: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not
Responding

PINPOINT TEST I: NO MEDIUM SPEED CONTROLLER AREA NETWORK (MS-CAN) COMMUNICATION, ALL MODULES ARE
NOT RESPONDING

NOTE:  The smart junction box (SJB) is also known as the generic electronic module (GEM).

Normal Operation

The MS-CAN uses an unshielded twisted pair cable, circuits 1847 (WH/OG) and 1848 (PK/OG). The smart junction box (SJB) and the instrument
cluster (IC) communicate with the scan tool using the MS-CAN.

This pinpoint test is intended to diagnose the following:

-

Wiring, terminals or connectors

-

Audio control module (ACM)

-

IC

-

SDARS module

-

Smart junction box (SJB)

Initial Inspection and Diagnostic Overview|Page 2464 > < Initial Inspection and Diagnostic Overview|Page 2462