Mustang V6-4.0L (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor (HO2S)
HEATED OXYGEN SENSOR (HO2S)
Special Tool(s)
Special Tool(s)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the heated oxygen sensor (HO2S) electrical connector.
3. NOTE: If necessary, lubricate the HO2S with penetrating and lock lubricant to aid in removal.
Using the special tool, remove the HO2S.
-
To install, tighten to 48 Nm (35 lb-ft).