Mustang V6-4.0L (2008)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Remove the LH door scuff plate.
2. Remove the LH A-pillar lower trim panel.
-
Remove the pin-type retainer and the trim panel.
3. Disconnect the inertia fuel shutoff (IFS) switch electrical connector.
4. CAUTION: Do not overtighten the fasteners or damage to the switch will occur.
Remove the 2 bolts and the IFS switch.
-
To install, tighten to 2 Nm (18 lb-in).