Mustang V6-4.0L (2008)
8. CAUTION: Note the position of the wiring harness, to aid installation. An incorrectly routed wiring harness may become damaged when
the seat is moved.
Detach the wiring pin-type retainers from seat backrest frame.
9. Remove the bolts and the side air bag module.
Installation
Seats installing a new side air bag module
1. NOTE: When installing a new side air bag module after deployment, install a new module, module bracket, module-to-bracket nuts,
U-nuts-to-backrest frame and module and bracket-to-backrest frame bolts.
Install the side air bag module bracket on the side air bag module and install the 2 nuts.
-
Tighten the nuts to 6 Nm (53 lb-in).