ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fluid Pan, Gasket and Filter|Page 3438 > < Fluid Pan, Gasket and Filter|Page 3436

Mustang V6-4.0L (2008)

Page 5
background image

5. Tighten the screws in a crisscross sequence.

^

Tighten to 11 Nm (8 lb-ft).

6. Install the H02S connector to the front of the transmission pan rail.

7. Connect the H02S connector and install the sensor wire retaining clip to the RH side of the transmission pan rail.

Fluid Pan, Gasket and Filter|Page 3438 > < Fluid Pan, Gasket and Filter|Page 3436