Mustang V6-4.0L (2008)
4. Tighten the screws in the sequence shown.
^
Tighten to 10 Nm (89 lb-in).
5. Install the manual control valve detent spring.
^
Tighten to 10 Nm (89 lb-in).
6. Install the reverse servo and the 4 screws. Tighten the screws in sequence in 2 stages.
^
Stage 1: Tighten to 5 Nm (44 lb-in).
^
Stage 2: Tighten to 11 Nm (8 lb-ft).