Mustang V6-4.0L (2008)
8. CAUTION: Do not damage the solenoid body connector pins.
Remove the solenoid body screws and remove the solenoid body by lifting on the body and pushing the connector from the other side of the case.
Installation
1. Install new O-ring seals on the solenoid body connector. Lubricate the O-ring seals with clean automatic transmission fluid.
2. CAUTION: Inspect the transmission case bore to make sure it is free of foreign material and not damaged. If it is damaged, transmission
leaks may occur.
Install the solenoid body. Tighten the screws in the sequence shown.
^
Tighten to 8 Nm (71 lb-in).