Mustang V6-4.0L (2008)
3. Remove and discard the 8 driveshaft flange bolts.
^
To install, tighten to 103 Nm (76 lb-ft).
4. NOTE: The driveshaft flanges fit tightly on the flange pilots. Never hammer on the driveshaft or any of its components to disconnect the
driveshaft flanges from the flange pilots. Pry only in the area shown with a suitable tool, to disconnect the driveshaft flanges from the flange pilots.
Using a suitable tool as shown, disconnect the driveshaft flanges from the flange pilots and remove the driveshaft.