Mustang V6-4.0L (2008)
Universal Joint: Service and Repair
Driveshaft Universal Joint - Snap Ring Type
Special Tool(s)
Material
Disassembly
1. Remove the driveshaft.
2. CAUTION: Do not, under any circumstance, clamp the driveshaft assembly in the jaws of a vise or similar holding fixture. Denting or
localized fracturing may result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench. Do not damage the tube.
3. NOTE: If the components are not marked and therefore installed incorrectly, driveshaft imbalance can occur.
Index-mark the driveshaft components.
4. Remove and discard all 4 of the snap rings.