Mustang V6-4.0L (2008)
1
Remove and discard the differential pinion shaft lock bolt.
2 Remove the differential pinion shaft.
6. CAUTION: Do not damage the rubber O-ring in the axle shaft grooves.
Remove the axle shaft U-washer.
1
Push in on the axle shaft.
2
Remove the U-washer.
7. CAUTION: Do not damage the axle shaft oil seal.
Remove the axle shaft.
Installation
1. Lubricate the lip of the axle shaft oil seal with grease.
2. CAUTION: Do not damage the axle shaft oil seal when installing the axle shaft.
Install the axle shaft.