Mustang V6-4.0L (2008)
3. Clean the drain plug. Apply Threadlock(R) and sealer to the plug threads and install the drain plug.
^
Tighten to 27 Nm (20 lb-ft).
4. NOTE: Before removing, clean the area around the filler plug.
Remove the filler plug.
5. Using a suitable oil suction gun, fill the transmission to the correct level with the specified fluid.
^
Transmission capacity is 3.46L (3.65 qt).
6. Apply Threadlock(R) and sealer to the plug threads and install the filler plug.
^
Tighten to 27 Nm (20 lb-ft).