Mustang V6-4.0L (2008)
Transmission Mount: Service and Repair
Transmission Rear Support Insulator
Transmission Rear Support Insulator Exploded View
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Using a suitable transmission jack, support the transmission.
3. Loosen the 2 transmission rear support insulator nuts.
4. Remove the 4 transmission mount outer bolts.
^
To install, tighten to 63 Nm (46 lb-ft).
5. Remove the transmission rear insulator center bolt. Carefully pry the exhaust brackets from the exhaust insulators on the rear transmission mount.
