Mustang V6-4.0L (2008)
Removal
NOTE: If the quarter window glass is being removed to repair a dust/water leak, remove and reinstall the existing quarter window glass.
1. Remove the quarter window trim panel.
2. Before cutting the urethane adhesive, remove dirt and other foreign material from the quarter window glass pinch weld area.
-
Use a clean shop towel or oil-free compressed air.
3. NOTE: Refer to manufacturer's instructions before using the tool.
Lubricate the urethane adhesive with water to aid the Interior Auto Glass Cut-Out Knife Kit when cutting the urethane adhesive.
4. WARNING:
-
Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
-
Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may
result in serious personal injury.
CAUTION: To avoid rust formation, use extreme care not to scratch the paint or primer or otherwise damage the pinch weld during