ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|08-18-2 > < Engine Controls - MIL ON/DTC's P0505/P0506/Hard Start|Page 4803
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - RPM Fluctuation On Coast-Down

TSB 08-20-10

10/13/08

4.0L MANUAL TRANSMISSION - RPM FLUCTUATION 
DURING NEUTRAL COAST DOWN

FORD:
2005-2006 Mustang

ISSUE
Some 2005-2006 Mustangs vehicles equipped with a 4.0L engine and manual transmission, may exhibit the RPM fluctuating up and down while coasting
in Neutral with clutch pedal released. No diagnostic trouble codes will be present. The RPM will drop back to idle with clutch pedal depressed.

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 56.12 and higher or 57.4 and higher. This new calibration is
not included in the VCM 2008.9 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

082010A

2005-2006 Mustang 4.0L

0.3 Hr.

Manual Transmission:
Check DTCs And
Reprogram The PCM
Authorization Decal Not
Required (Do Not Use
With 12650D)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECAL

04

Disclaimer

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|08-18-2 > < Engine Controls - MIL ON/DTC's P0505/P0506/Hard Start|Page 4803