Mustang V6-4.0L VIN N (2006)
Transmission Position Switch/Sensor: Adjustments
Transmission Range (TR) Sensor Adjustment
Special Tool(s)
Adjust
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle/Application and ID
2. Disconnect the shift cable from the manual control lever.
3. Loosen the screws.
4. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
^
Tighten 8 Nm (71 inch lbs.).