Mustang V8-302 5.0L COBRA (1995)
![background image](/ford/mustang/v8-302_5.0l_cobra/Page-1471001.png)
Anti-Lock Brake Control Module: Service and Repair
1. Remove hydraulic assembly.
2. Remove Torx(r) head screw from black plastic cover, then the cover.
3. Remove 15- and 4-pin connectors.
4. Remove six anti-lock brake control module to hydraulic control unit Torx(r) head bolts.
5. Remove control module by pulling straight up over ground post.
6. Reverse procedure to install.