ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Convertible|Page 8043 > < Convertible|Page 8041
Page 3
background image

belt is buckled and does not allow the occupant freedom of movement. This mode provides a tight lap/shoulder belt fit on occupant and child safety
seat or infant carrier installation restraint.

WARNING: REAR-FACING INFANT SEATS SHOULD NEVER BE PLACED IN THE FRONT SEAT. 

The automatic locking mode must be used when installing a child safety seat on the front passenger seat and rear outboard seats where dual locking
retractors are provided.

To switch the retractor from the emergency locking mode to the automatic locking mode, perform the following steps:

1. Buckle the lap/shoulder combination belt.

2. Grasp the shoulder portion of the belt and pull downward until all of the belt is extracted. When allowed to retract, a clicking sound will be heard.

At this time, the belt retractor is in the automatic locking mode (child restraint mode).

NOTE: When the combination lap/shoulder belt is unbuck led and allowed to retract completely, the retractor will switch back to the vehicle
sensitive (emergency) locking mode. 

A clicking sound will continue to be heard as the belt is allowed to retract. This indicates that the retractor is in the "automatic locking mode".

Convertible|Page 8043 > < Convertible|Page 8041