Mustang V8-302 5.0L COBRA (1995)
Intake Air Temperature Sensor: Service and Repair
Component Locations
REMOVAL
1. Disconnect battery ground cable (14301).
2. Disconnect engine control sensor wiring (12A581) from Intake Air Temperature (IAT) sensor (12A697).
3. Remove IAT sensor from air cleaner outlet tube (9B659).
INSTALLATION
To install, reverse removal procedure. Tighten IAT sensor securely.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.