Mustang V8-302 5.0L HO (1987)
Headlamp Switch: Service and Repair
Headlamp Switch
Removal and Installation
1. Disconnect battery ground cable.
2. Disengage two locking tabs on LH side of switch (under paddles) by pushing the tabs in with a small screwdriver and pulling on the paddles.
3. Using a screwdriver, pry the RH side of the switch out of the instrument panel.
4. Pull switch completely out of opening and disconnect the two connectors.
5. To install, assemble the two connectors to the switch and insert switch into instrument panel opening until locking tabs on both sides of switch
snap into place.