Mustang V8-302 5.0L HO (1987)
FIGURE 3
5.
Cut out the full size template and position it on the fender extension as shown in Figure 3.
6.
Scribe the new edge line on the fender extension.
7.
Using a sharp cutting tool, trim off the excess material from the fender extension, Figure 3.
8.
Using a piece of fine sandpaper, dress the new edge line on the fender extension.
9.
Touch-up the new edge line on the fender extension with matching paint.
10.
Re-position the fender extension to the fender flange.
