Mustang V8-4.6L (2009)
Drive Belt: Service and Repair
Supercharger Belt
Supercharger Belt
Removal and Installation
1. Remove the accessory drive belt. For additional information, refer to Accessory Drive Belt - 5.4L (4V) See: Accessory Drive Belt.
2. Using a suitable belt tensioner release tool, rotate the Supercharger (SC) belt tensioner clockwise and remove the SC belt from the SC pulley.
3. NOTE: The SC belt is routed behind the SC belt tensioner.
Remove the SC belt tensioner bolt, the tensioner and the SC belt.
-
To install, tighten to 48 Nm (35 lb-ft).
4. NOTE: Refer to the illustration for correct SC belt routing.
To install, reverse the removal procedure.
