Mustang V8-4.6L (2009)
-
Is the DLC pin 7 OK?
Yes
GO to G2.
No
REPAIR the DLC as necessary. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
G2 CHECK THE RCM CONNECTION
-
Depower the SRS. Refer to Air Bag Systems.
-
Disconnect: RCM C2041a.
-
Are RCM C2041a pins 11, 12 and 16 OK?
Yes
GO to G3.
No
REPAIR the RCM connector pins as necessary. REPOWER the SRS. REFER to Air Bag Systems. CLEAR the DTCs. REPEAT the network test with
the scan tool.
-------------------------------------------------
G3 CHECK THE RCM VOLTAGE SUPPLY CIRCUIT FOR AN OPEN
-
Deactivate the SRS. Refer to Air Bag Systems.
-
Repower the SRS. Refer to Air Bag Systems.
-
Ignition ON.
-
Measure the voltage between RCM C2041a-12, circuit 937 (RD/WH), harness side and ground.
-
Is the voltage greater than 10 volts?
Yes
GO to G4.
No
VERIFY the Smart Junction Box (SJB) fuse 17 (10A) is OK. If OK, REPAIR the circuit. If not OK, REFER to the Wiring Diagrams to IDENTIFY the
possible causes of the short circuit.
REACTIVATE the SRS. REFER to Air Bag Systems. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
G4 CHECK THE RCM GROUND CIRCUIT FOR AN OPEN