Mustang V8-4.6L (2009)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Removal and Installation
NOTICE: Electronic modules are sensitive to electrical charges. The anti-lock brake system (ABS) module can be damaged if exposed to these
charges.
1. Remove the air cleaner assembly.
2. Disconnect the ABS module electrical connector.
3. Remove the 4 screws and the ABS module.
-
To install, tighten to 3 Nm (27 lb-in) in the sequence shown.
4. To install, reverse the removal procedure.