Mustang V8-4.6L DOHC (1996)
Console: Technical Service Bulletins
Center Console - Gap Hider Availability
Article No.
96-25-3
12/02/96
INTERIOR TRIM - CENTER CONSOLE - AVAILABILITY OF GAP HIDER FOR CENTER CONSOLE - VEHICLES BUILT FROM 6/1/96
FORD:
1996-97 MUSTANG
ISSUE:
The center console-to-parking brake handle gap hider is now available for service as a separate part. Previously, the gap hider was only available as part
of the center console.
ACTION:
On vehicles built after 6/1/96, the center console added extra mounting tabs to accommodate replacement of the center console-to-parking brake handle
without replacing the entire center console. If replacement of the gap hider becomes necessary, refer to the following Service Procedure for details.
SERVICE PROCEDURE
1.
Remove the center console, referring to the appropriate year Mustang Service Manual, Section 01-12.
2.
If the parking brake lever was not properly aligned, realign the lever following the Service Procedure outlined in TSB 95-17-3.
3.
Remove the gap hider from the center console by trimming off the heat stake tabs that are retaining the gap hider. Do not trim oft the unused heat
stake tabs. They will be used to secure the new gap hider.
4.
Place the new gap hider and retainer onto the remaining heat stakes and melt over the tabs using a soldering iron or similar tool. Once the tabs
cool, make sure the gap hider and retainer are securely in place.
5.
Reinstall the center console, referring to the appropriate year Mustang Service Manual, Section 01-12.
PART NUMBER
PART NAME
F6ZZ-2A713-AAA
Gap Hider
F6ZZ-2405-AA
Retainer
OTHER APPLICABLE ARTICLES: 95-17-3
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
962503A
Replace Console Assembly
0.4 Hr.
- Not To Be Used With
Operation B
962503B
Replace Gap Hider - Not
0.5 Hr.
To Be Used With
Operation A
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2A713
29
OASIS CODES: 107000, 302000
