Mustang V8-4.6L DOHC (1996)
![background image](/ford/mustang/v8-4.6l_dohc/Page-413001.png)
Oil Level Warning Indicator: Customer Interest
Low Oil Indicator Lamp - Illuminated/Oil Level OK
Article No.
97-24-15
11/24/97
^
LAMP - LOW OIL INDICATOR LAMP
ILLUMINATION - 4.6L VEHICLES
^
OIL - LOW OIL INDICATOR LAMP ILLUMINATION -
4.6L VEHICLES
FORD:
1996 MUSTANG
ISSUE:
The low oil level indicator lamp may illuminate when the oil level is in the acceptable range on the oil level indicator on some vehicles. This may be
caused by the driver parking the vehicle on a downhill slope to the right.
ACTION:
In some situations, all that may be required is to advise the customer that parking on a slope may activate the low oil indicator lamp. In a unique situation
when customer encounters uneven terrain on a regular basis, install a revised oil level indicator and adjust the engine fill capacity. Refer to the following
Service Procedure for details.
SERVICE PROCEDURE
1.
Remove and discard the existing oil level indicator.
2.
Install the revised Oil Level Indicator (F6ZZ-6750-CA).
3.
Clean the front driver's side valve cover and apply the unique oil fill quantity label included in the kit.
4.
Apply a second oil fill label (included in the kit) to the inside front cover of the customer's Owner Guide.
5.
Add the appropriate amount of engine oil to bring the engine oil level up to the MAX mark on the new oil level indicator. This will usually require
an additional 0.5 L (1/2 quart).
PART NUMBER
PART NAME
F6ZZ-6750-CA
Oil Level Indicator
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
972415A
Replace Oil Level Indicator
0.3 Hr.
And Install Labels As
Outlined
DEALER CODING
CONDITION
BASIC PART NO.
CODE
6675
07
OASIS CODES: 203000, 203200, 206000, 401000, 499000