Mustang V8-4.6L DOHC (1996)
2.
Install worm clamps to the catalytic converter, catalytic pipes, muffler pipes or muffler as shown in Figure 1 for the typical light truck and Figure 2
for the typical passenger car.
3.
Align the clamps to secure the heat shield to the catalytic converter, catalytic pipes, muffler pipes or muffler as required.
4.
Tighten the clamps to 6.8 N.m (60 lb-in).
5.
Trim the excess "ear" of the clamp to approximately 2.54 cm (1").
PART NUMBER
PART NAME
FOTZ-5A231-A
Worm clamp (4-1/2" To 9-1/2")
W705949-S300
Worm clamp (3/4" To 4")
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 98-6-4
WARRANTY STATUS: Eligible Under Basic Warranty Coverage For 1991 And Prior Models Bumper To Bumper Warranty Coverage For 1992-99
Models, And Any Applicable Emissions Warranty Coverage