Mustang V8-4.6L DOHC (1996)
![background image](/ford/mustang/v8-4.6l_dohc/Page-1073002.png)
Accelerator Cable Bracket
REMOVAL AND INSTALLATION
1. Remove screw retaining accelerator cable to accelerator cable bracket
2. Remove the bolts or nuts securing the accelerator cable bracket to the engine.
3. Lift the accelerator cable out of the accelerator cable bracket. Remove the accelerator cable bracket.
4. To install, reverse removal procedure and tighten accelerator cable bracket bolts to 15-20 Nm (12-15 lb ft).