Mustang V8-4.6L DOHC VIN R (2003)
-
Connect the A/C duct at the air plenum.
-
Install the duct at the A/C register and install the two screws.
6. Push in on the two tabs and close the glove compartment door.
7. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
8. Install the driver air bag module.
1. Connect the driver air bag module electrical connector.
-
Position the driver air bag module to the steering wheel.
9. Install the two driver air bag module retaining bolts.