Mustang V8-4.6L DOHC VIN R (2003)
positioning the hoist adapters prior to lifting the vehicle.
^
Never use the differential housing as a lift point. Damage to the differential housing and cover may occur.
^
Do not lift vehicle on rocker panel pinch flange or convertible cross brace. Body damage may occur.
Lift the vehicle using the Lifting Points.
Lifting Points - Drive On Lift
CAUTION: To prevent possible damage to the underbody, do not drive the vehicle onto the drive on lift without first checking for possible
interference.
Check for interference between the upright flanges of the hoist rails and the underbody.
If an interference exists, modify the hoist flanges or build up the approach ramps as necessary to provide clearance.
Lifting Points - Frame Contact Lift, Single Post Lift, Two Post Lift
CAUTION:
^
Do not position lift pads under the No.3 crossmember.
^
Do not lift vehicle on rocker panel pinch flange or convertible cross brace. Body damage may occur
NOTE: Adapters may be necessary to clear vehicle components to lift the vehicle safely. The adapters must be placed at the four designated
contact points. Position the adapters so they are center on the adapter contact area.
Lift the vehicle at the applicable lift points.
