Mustang V8-4.6L DOHC VIN R (2003)
3. NOTE: If possible, allow one hour before filling the axle with lubricant to make sure the silicone sealant has cured.
Install the differential housing cover.
1
Install the differential housing cover.
2
Install the 10 bolts.
4. NOTE: If it is necessary to refill a Traction-L&O axle with new lubricant, add 118 ml (4 oz) of Additive Friction Modifier C8AZ-1913546-A or
equivalent meeting Ford specification EST-M2C118-A before filling the axle with the new lubricant.
NOTE: In-vehicle repair refill capacities are determined by filling the rear axle with the specified lubricant to 6.4 - 14.3 mm (1/4 - 9/16 inch)
below the bottom of the fill hole.
Fill the rear axle to the level shown, approximately 1.66 - 1.77 liters (3.5 - 3.75 pints) of lubricant, and install the filler plug.
^
Use SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.
5. Lower the vehicle.