Mustang V8-4.6L SC VIN Y (2004)
5. Remove the front seat backrest pad adjusting pump screws.
6. Remove the front seat backrest pad adjusting pump.
1
Disconnect the electrical connector.
2
Disconnect the power lumbar support air hose.
Vehicles with power bolster and lumbar
7. Remove the driver seat backrest latch.
8. Remove the pivot bolt and seat backrest.
-
Disconnect the power lumbar support air hoses.
9. Release the J-clips.
10. NOTE: When removing the cushion from frame, it is not necessary to remove the trim cover from the cushion foam pad.