Mustang V8-4.6L SC VIN Y (2004)
Brake Rotor/Disc: Service and Repair
Front
Brake Disc
Disc
Removal
1. Remove the front disc brake caliper anchor plate.
2. Match mark the hub and the brake disc.
3. If necessary, remove and discard the keeper nuts.
4. NOTE: If the brake disc cannot be easily removed, apply Rust Penetrant and Inhibitor F2AZ-19A501-A or equivalent meeting Ford specification
ESR-M99C56-A to the mating surfaces.
Remove the brake disc from the hub.
Installation
1. Clean rust and foreign material from the mating surfaces of the hub and brake disc.
^
Use Metal Brake Parts Cleaner F3AZ-19579-SA or equivalent to clean the brake disc and hub.
2. Apply High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA or equivalent meeting Ford specification ESE-M12A4-A to the hub
flange.
