Mustang V8-4.6L SC VIN Y (2004)
Cruise Control Servo: Service and Repair
ACTUATOR - SPEED CONTROL SERVO
REMOVAL
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. Remove the LH wheel and tire.
3. Position aside the LH front splash shield.
1
Remove the pin-type retainers.
2
Remove the screws.
3
Position aside the LH front splash shield.
4. Disconnect the speed control servo electrical connector.
5. Depress the locking tab and rotate the speed control actuator cable cap to remove.
6. Disconnect the speed control cable from the throttle nailhead.