Mustang V8-4.6L SC VIN Y (2004)
24. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
Clean and inspect the sealing surfaces and the valve cover gaskets. Install new gaskets, if necessary. Make sure the gaskets are correctly seated on
the valve cover.
Installation
1. NOTE: If the valve cover is not secured within four minutes, the sealant must be removed and the sealing area cleaned with metal surface cleaner.
Allow to dry until there is no sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can result in future oil leakage.
Apply a bead of silicone gasket and sealant to areas shown.
2. Install the LH valve cover and loosely install the bolts.
