Mustang V8-4.6L SC VIN Y (2004)
Fuel Injector Wiring Harness: Service and Repair
FUEL CHARGING WIRING HARNESS
REMOVAL
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly
flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal injury.
1. Disconnect the battery ground cable.
2. Remove the exhaust gas recirculation (EGR) valve and the exhaust manifold to EGR valve tube.
3. Remove the bolts and the LH ignition coil cover.
4. Disconnect the LH ignition coil electrical connectors.
5. Disconnect the barometric pressure (BARO) sensor electrical connector.
