Mustang V8-4.6L SC VIN Y (2004)
![background image](/ford/mustang/v8-4.6l_sc_vin_y/Page-1569002.png)
6. Remove the ignition coils.
1
Disconnect the connectors.
2
Remove the ignition coils.
INSTALLATION
1. NOTE: Verify that the ignition coil spring is correctly located inside the ignition coil boot and that there is no damage to the tip of the boot.
To install, reverse the removal procedure.
-
Apply a light coat of dielectric grease to the inside of the ignition coil boots.