ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Vehicle Lifting|Description and Operation|Page 6063 > < Axle Nut|Specifications
Page 1
background image

Vehicle Lifting: Description and Operation

JACKING

WARNING:  NEVER RUN THE ENGINE WITH ONE WHEEL OFF THE GROUND, SUCH AS WHEN CHANGING A TIRE. THE
WHEEL STILL ON THE GROUND COULD CAUSE THE VEHICLE TO MOVE.

CAUTION:
^

The jack provided with the vehicle is intended to be used in an emergency for changing a deflated tire. To avoid damage to the vehicle, never
use the jack to lift the vehicle for any other purpose. Refer to the Owner Guide when using the jack supplied with the vehicle.

^

Under no circumstances should the vehicle ever be lifted by the suspension arm brackets, rear stabilizer or differential housing or convertible
cross brace. Severe damage to the vehicle could result.

^

Do not attempt to use jack pressure on either the front bumper or the rear bumper of any vehicle. Damage to the bumper covers will occur.

Lift the vehicle using the jacking points.

Jacking Points

To lift the front or either side of the front end, position the floor jack under the front frame lift points

To lift the rear or either side of the rear end, position the floor jack under the rear lift points.

LIFTING

CAUTION:
^

Do not allow the lift adapters to contact the steering linkage, suspension arms, stabilizer arms, or to compress the lower suspension arm
stabilizer bar insulator. Damage to the suspension, exhaust and steering linkage components may occur if care is not exercised when

Vehicle Lifting|Description and Operation|Page 6063 > < Axle Nut|Specifications