Mustang V8-4.6L VIN H (2005)
Air Bag Deactivation Indicator: Description and Operation
PASSENGER AIR BAG DEACTIVATION (PAD) INDICATOR
Passenger Air Bag And PAD Indicator Status
CAUTION: The passenger air bag deactivation (PAD) indicator is part of the hazard/traction control switch assembly and cannot be
separately serviced.
The passenger air bag deactivation (PAD) indicator is a visual indicator used to inform the front seat occupants of the passenger air bag deactivation
state. The PAD indicator is located in a position visible to each front seat occupant.
The restraints control module (RCM) controls the state of the PAD indicator through a direct hardwire connection, based on information provided by the
occupant classification sensor (OCS) system. The PAD indicator is lit to indicate the passenger air bag module is deactivated (OFF). An exception to this
is when the front passenger seat is determined to be empty, and therefore indication of a deactivated passenger air bag module is not necessary. In all
other cases the PAD indicator is unlit when the passenger air bag module is enabled.
When the ignition switch is in the RUN position, the PAD indicator prove-out period is initiated by the RCM. The RCM briefly activates the PAD
indicator to prove-out the indicator function and verify to the front occupants correct functional operation of the PAD indicator.
The PAD indicator will illuminate/not illuminate within 1.0±0.5-seconds of a change of state from the OCS system.
When an OCS system fault is present the SRS defaults the passenger air bag module to enabled regardless of the size of the occupant in the front
outboard passenger seat. The PAD indicator will be unlit.
The table indicate the passenger air bag status and the PAD indicator status based the size of the front outboard passenger occupant.
