Mustang V8-5.0L (2011)
8. Install an Engine Lifting Bracket on the rear of the RH cylinder head.
9. NOTE:
It may be necessary to install washers between the Engine Lifting Bracket and the cylinder head to prevent the Engine Lifting Bracket from
contacting the valve cover while supporting the engine.
Install an Engine Lifting Bracket on the side of the LH cylinder head.
10. NOTE:
The draw screw and bracket from the heavy duty Engine Support Bar (303-F070) must be used with the light duty Engine Support Bar
(303-F072). This will provide enough clearance between the draw screw bracket and the cowl.
Install the Engine Support Bar.
