Mustang V8-5.0L (2011)
10. Connect the steering shaft and install the steering shaft pinch bolt.
-
Tighten to 47 Nm (35 lb-ft).
11. Connect the 2 EPAS electrical connectors and the pin-type retainer.
12. NOTE:
RH shown, LH similar.
Install the crossmember brace and 4 bolts (2 shown).
-
Tighten to 65 Nm (48 lb-ft).
13. NOTE:
RH shown, LH similar.
Tighten the 2 nuts for the crossmember brace to 65 Nm (48 lb-ft).