Mustang V8-5.0L (2011)
14. Install the lower air deflector and the 9 bolts.
-
Tighten to 5 Nm (44 lb-in).
15. Install the front tires and wheels.
16. Using the Engine Support Bar, lower the engine in position.
17. Remove the engine support bar.
18. Remove the RH and LH engine lifting eyes.
19. Install the RH and LH engine support insulator nuts.
-
Tighten to 63 Nm (46 lb-ft).
20. Install the radiator sight shield and the 8 pin-type retainers.
21. Install the ACL outlet pipe.
22. NOTE:
The engine appearance cover rubber grommets may remain on the cover. If so, remove the grommets from the cover and install them on the intake
manifold before installing the cover.
Install the engine appearance cover.