Mustang V8-5.4L SC (2008)
Trunk / Liftgate Lock Cylinder: Service and Repair
LUGGAGE COMPARTMENT LID LOCK CYLINDER
Removal and Installation
1. Remove the luggage compartment lid trim panel.
2. Disconnect the luggage compartment lid latch actuator cable from the luggage compartment lid lock cylinder.
3. If equipped, disconnect the luggage compartment lid lock cylinder electrical connector.
4. Remove the 2 bolts and the luggage compartment lid lock cylinder.
-
To install, tighten to 9 Nm (80 lb-in).
5. To install, reverse the removal procedure.
-
Lubricate the luggage compartment lid lock cylinder after installation.
