Mustang V8-5.4L SC (2008)
Hose/Line HVAC: Service and Repair
Compressor to Condenser Discharge Line
COMPRESSOR TO CONDENSER DISCHARGE LINE
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the A/C system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
5.4L (4V) vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
4.6L vehicles
2. Remove the air cleaner outlet tube.
All vehicles
3. Recover the refrigerant.
4. Disconnect the compressor discharge fitting.
-
Discard the O-ring seals.
5. Disconnect the dual-function pressure switch electrical connector and remove the dual-function pressure switch.
6. Remove the condenser inlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal.
-
To install, tighten to 8 Nm (71 lb-in).