Mustang V8-5.4L SC (2008)
Headlamp Bulb: Service and Repair
HEADLAMP BULB
Removal and Installation
WARNING: The bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle
the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.
NOTE:
-
The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period
of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn
on the headlamps with the bulb removed from the headlamp.
-
Make sure the headlamp switch and the ignition switch are in the OFF position.
-
For the LH bulb on vehicles equipped with the Bullitt package, it is necessary to remove the air cleaner housing.
Halogen bulb
1. Disconnect the headlamp bulb electrical connector.
2. Rotate the headlamp bulb approximately 1/8 turn counterclockwise and remove the bulb from the headlamp assembly.
HID bulb
3. Disconnect the electrical connector from the headlamp assembly.
4. Remove the HID bulb access cover.
5. Release the retainer and remove the headlamp bulb.
-
Disconnect the electrical connector.
