ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Transmission and Drivetrain > < M/T, Engine Controls - Clutch Drag|Page 3539
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Low Power/Low Idle/Driveability issues

TSB 10-2-3

02/15/10

HESITATION/LOSS OF RPM/LOW IDLE RPM/DRIVEABILITY CONCERNS

FORD:
2007-2009 Mustang

ISSUE
Some 2007-2009 Mustang GT500 vehicles equipped with a 5.4L engine may exhibit hesitation, loss of RPM and low idle RPM driveability concerns.
Some 2007 Mustang GT500 vehicles equipped with a 5.4L engine may exhibit cold start concerns at high altitude with ambient temperatures of 20 to 35 
°F (-7 to 2 °C).

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 64.10 and higher or 65.01 and higher. This new calibration is
not included in the VCM 2010.1 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

100203A

2007-2009 Mustang 5.4L

0.3 Hr.

DOHC: Reprogram The
PCM (Do Not Use With
Any Other Labor
Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECAL

04

Disclaimer

Transmission and Drivetrain > < M/T, Engine Controls - Clutch Drag|Page 3539