Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Keyless Entry Transmitter Battery: Service and Repair
REMOVAL AND INSTALLATION
1. Snap apart the transmitter case by twisting a coin between the edges of the front and rear halves.
CAUTION: Do not take the front half of the keyless entry remote transmitter apart.
2. Remove the discharged batteries.
3. Install the new batteries.
NOTE:
^
Batteries must be installed with the positive side toward the bottom of the transmitter case.
^
The remote entry transmitter is powered by two coin-type 3 volt lithium batteries.
4. Snap the two halves of the transmitter case back together.
