ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Enclosure Assembly|Page 9017 > < Enclosure Assembly|Page 9015
Page 5
background image

REMOVAL

1. Remove rear seat. 
2. Remove rear quarter trim panel. 
3. For base radio speakers, remove four retaining screws.
4. Disconnect electrical connector(s) and remove radio speakers.

INSTALLATION

1. Follow removal procedure in reverse order.
2. Tighten base radio speaker retaining screws to 1.8-2.6 N.m (16-23 lb-in).

Subwoofer-Convertible

NOTE: The convertible top needs to be in the up position to remove the subwoofer radio amplifiers.

Enclosure Assembly|Page 9017 > < Enclosure Assembly|Page 9015