Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Alarm Module: Service and Repair
Removal and Installation
Anti-Theft System, Active
REMOVAL AND INSTALLATION
1. Disconnect battery ground cable.
2. Open the luggage compartment door. Remove trim from LH side of luggage compartment.
3. Disconnect electrical connectors from anti-theft alarm control.
4. Remove anti-theft alarm control by pushing on the panel retaining tab below the anti-theft alarm control while sliding the anti-theft alarm control
down.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Test system for proper operation.
Anti-Theft System, Passive