Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
4. Remove two bolts retaining front seat back latch to front seat back frame.
5. Remove two screws retaining front seat back latch lower cover to front seat cushion frame and spring.
6. Remove two bolts retaining front seat back latch to front seat cushion frame and spring and remove front seat back latch.
INSTALLATION
1. Follow removal procedure in reverse order.
NOTE: After latch assembly replacement, the seat assembly must be checked for proper operation prior to installing the seat assembly. Refer to
front seat back latch sensitivity test. See: Testing and Inspection/Latch Sensitivity Test
2. Tighten latch-to-front seat back frame bolts to 22-32 N.m (16-23 Lb-Ft).
3. Tighten front seat back latch to front seat cushion frame and spring bolts to 47-63 N.m (35-46 Lb-Ft).
4. Check seat tracks, recliner and safety belts for proper operation.